Operation - GreenWorks GBL80300 Owner's Manual

OPERATION

W A R N I N G
Do not allow familiarity with this product to make you careless. Remember that a careless fraction
W A R N I N G
Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with
W A R N I N G
Do not use any attachments or accessories not recommended by the manufacturer of this product.
Before each use, inspect the entire product for damaged, missing, or loose parts, such as
screws, nuts, bolts, caps,etc. Tighten securely all fasteners and caps and do not operate this
product until all missing or damaged parts are replaced.
APPLICATION
You may use this product for the purposes listed below:
Clearing hard surfaces such as driveways and walkways.
Keeping decks and driveways free from leaves and pine needles.
TO INSTALL/REMOVE BATTERY PACK (Fig.4)
TO INSTALL
Align the ribs of the battery pack with the mounting slots in the blower's battery port.
Insert the battery into the battery opening until the battery release button locks into place.
TO REMOVE
W A R N I N G
Always take care of your feet, children, or pets around you when pressing the battery release
a high location.
Press the battery release button on the blower. This will cause the battery to slightly protrude
out of the tool.
11