Motorola Broadband User Manual page 37

WavePhone
™
• Selective Call Forwarding (*63)
phone line. All other calls will ring through normally. Enter code again to edit or cancel Selective Call
Forwarding. Simply listen to the helpful prompts that will walk you through setting up, adding and
removing numbers or turning off this feature.
Note: Selective Call Forwarding and Call Forwarding can be available on the same line, but only one can
be active at a time.
• Selective Call Rejection (*60)
code again to edit or cancel Selective Call Rejection. Simply listen to the helpful prompts that will
walk you through setting up, adding and removing numbers or turning off this feature.
• Selective Call Acceptance (*64) –
Simply listen to the helpful prompts that will walk you through setting up, adding and removing
numbers or turning off this feature.
• Anonymous Call Rejection (*77)
Caller ID information. They will hear a message that you are not receiving anonymous calls with
instructions on how to disable their Caller ID privacy.
Cancel Anonymous Call Rejection (*87)
• Distinctive Alert (*61) –
feature, dial *61, then follow the helpful prompts to add or remove numbers.
• Speed Dial (*74)
number on speed dial automatically replaces the previously saved number. To remove a speed dial
number, follow the directions below without entering a phone number.
1. Pick up the line and listen for the dial tone.
2. Dial *74 and listen for a second dial tone.
3. Enter a one-digit code from two to nine, followed by the local or long-distance
number you want to store exactly how you would need to dial it to make the call and
then press the # button to store it.
4. Listen for two beeps or a recording to confirm the number is stored and hang up.
Note:
To dial a saved speed dial number, at the dial tone, press the appropriate one-digit
number followed by the # key.
• Two-Digit Speed Dial (*75)
Adding a new number on two-digit speed dial automatically replaces the previously saved number.
To remove a speed dial number, follow the directions below without entering a phone number.
1. Pick up the line and listen for the dial tone.
2. Dial *75 and listen for a second dial tone
3. Enter a two-digit code from twenty to forty-nine, followed by the local or long-
distance number you want to store exactly how you would need to dial it to make
the call and then press the # button to store it
4. Listen for two beeps or a recording to confirm the number is stored and hang up.
Note:
To dial a saved speed dial number, at the dial tone, press the appropriate two-digit
number followed by the # key.
– Forward calls from a list of up to 12 people to another
– Screen calls from up to 12 numbers that you specify. Enter
Accept calls only from phone numbers that you specify.
– Automatically block numbers that have disabled their
Assign up to 12 phone numbers a distinctive ring. To set up this
– Store up to eight unique numbers for convenience and speed. Adding a new
- Store up to thirty unique numbers for convenience and speed.
– Disables anonymous call rejection.
37