Table of Contents
Advertisement
Mounting Dimensions
DIN-Rail Mounting
The aluminum DIN-Rail attachment plate should be fixed to the back
panel of Weidmüller Media Converter when you take it out of the box.
If you need to reattach the DIN-Rail attachment plate to the device,
make sure the stiff metal spring is situated towards the top, as shown
in the figures below
STEP 1:
Insert the top of the DIN-Rail into
the slot just below the stiff metal
spring.
.
- 4 -
STEP 2:
The DIN-Rail attachment unit will
snap into place as shown below.
Advertisement
Table of Contents
