Table of Contents
Advertisement
WARNINGS
Make sure that the vehicle is on
firm, level ground with the
wheels pointing straight ahead.
Switch off the ignition and apply
the parking brake.
If your vehicle has a manual
transmission, select first or
reverse gear. If it has an automatic
transmission, select park.
Have the passengers leave the
vehicle.
Secure the diagonally opposite
wheel with an appropriate block
or wheel chock.
Make sure that the arrows on
directional tyres point in the
direction of rotation when the vehicle
is moving forwards. If you have to fit
a spare wheel with the arrows
pointing in the opposite direction,
have the tyre refitted in the correct
direction by a properly trained
technician.
Do not work underneath the
vehicle when it is supported only
by a jack.
CAUTION
Do not lay alloy wheels face
down on the ground, this will
damage the paint.
Note: Make sure that the jack is
vertical to the jacking point and the
base is flat on the ground.
Wheels and tyres
121
E76137
1. Attach the chisel clip to the end
of the wheelbrace.
2. Insert the flat end of the wheel
brace between the rim and the
hub cover and carefully remove
the hub cap or cover.
E76138
3. Install the locking wheel nut key.
4. Slacken the wheel nuts.
5. Jack up the vehicle until the tyre
is clear of the ground.
Advertisement
Table of Contents
