u z
u
Dialog 3185 and 3185MW
Tone/Pulse dialling
On delivery, your telephone is set to tone dialling mode. To find out
if you can use tone dialling, proceed as follows:
Lift the handset and dial the number
The usual way of making an outgoing call. If the call goes through,
you don't have to change your telephone to pulse dialling.
If, however, the dial tone continues without interruption when you
start to dial the number, you are connected to an exchange/PBX
that requires pulse dialling and you need to set it to pulse dialling.
Slide to change
Notes: You can also temporarily switch your telephone to
tone dialling, see
Flash/Earth mode
On delivery, your telephone is set to flash mode. The R-button
(register recall) can be set to two different modes: "timed break"
(flash) and "earth". To find out if you have to change the mode of
the R-button, proceed as follows:
Lift the handset
z
Make a call and use any of the services that require R
If you cannot use the service, you need to change the mode of the
R-button to the "earth" position.
Slide to change
Hearing aid compatibility
Since your telephone has a built-in inductive coupler for the hard-
of- hearing, anyone so desiring can use the telecoil in his/her
hearing aid while telephoning. To do so, simply switch the hearing
aid in the T position.
section
"During
Calls" on page
Adjustments
14.
71