Advertisement
DOCKING AND UNDOCKING THE COMPUTER
1. With the slide plate in the open
position, insert the bottom of the
computer into the docking station.
The guide pins on the dock will help to
align the computer.
Then rotate the top of the comptuter
under the top hooks until the
computer is resting on the two supports
sticking out from the slide plate.
(see Figues 1, 2 & 3)
3. Push downward on the wing turn
latch until the slide plate is holding the
computer in place, then turn the latch
to hold the slide plate in the
downward possition. (See Figure 4)
4. (Optional) The key lock can now
be used for security purposes.
TO UNDOCK THE COMPUTER
1. Undock the computer by double
clicking on the Getac Utilities icon on
the desktop (OSDC). Click the Docking
button to undock the computer.
2. Unlock if locked.
3. Rotate the wing turn latch 90 deg.
The slide plate is spring loaded and
should raise with your hand when you
release the pressure on the slide plate.
4. Rotate the top of the computer out
of the dock to remove.
Figure 1
Supports
Figure 2
Figure 3
Figure 4
Advertisement
