Important Notes - Vita-Mix Bar Boss Advance Use And Care Manual

Hide thumbs Also See for Bar Boss Advance:
Table of Contents

Advertisement

Important Safeguards
17.
CAUTION:
The light in the front panel START/STOP switch, when lit, indicates the
power to blender is ON and blender could start. Turn power OFF, or unplug the
machine before touching movable parts. Shut OFF power switch at night or
whenever machine will be left unattended.
Save These Safety Instructions
Enjoy the safety of this grounded machine. The Vita-Mix blender's U.S. power cord
comes equipped with a three-prong (grounding) plug which mates with a standard three-
prong wall outlet (Figure A). This cord will vary for countries outside the United States.
Adapters (Figure B) are available for two-prong outlets. Do not cut or remove the
third (ground) prong from the plug or power cord.
Consult your electrician if you are not sure if the wall outlet is grounded through the
building wiring. With a properly grounded two-prong wall outlet, ground the machine by
attaching the tab on the adapter to the wall outlet cover by means of the screw in the
center of the cover (Figure B).
WARNINGS!
THREE-PRONG ADAPTERS ARE NOT TO BE USED IN CANADA.

IMPORTANT NOTES!

The instructions appearing in this Use and Care Manual cannot cover every possible condition
and situation that may occur. Common sense and caution must be practiced when operating and
maintaining any appliance.
Figure A
Figure B
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Drink machine advanceBarboss advanceDrink machine advance

Table of Contents