Safety Information The lightning bolt To reduce the risk of electric The exclamation point within a triangle is within a triangle is shock, do not remove cover intended to alert the user to important intended to alert the of this device. There are no operating and maintenance (servicing) user to the presence user serviceable parts...
Page 3
Pulse Four Channel 2x 100W Mixer Amplifier Designed for use in small to medium venues the PMH200 mixer amplifier is ideal for sound reinforcement of vocals or music. When coupled with a pair of speakers this will suffice for rehearsal rooms, small to medium band gigs, small school halls or presentations.
Page 4
1. Equaliser (EQ) Controls - (TREBLE / BASS) – This is a 2-band equaliser for adjusting different frequency bands. The BASS control is centered at 80Hz and the TREBLE centered at 12.5kHz 2. Effects (EFF) Control – Provides control over the level of signal sent from the channel into the Effects processor.
Page 5
– the minimum impedance per speaker output is 4 . If in any doubt please contact your dealer or the Pulse Technical as the wrong combination of speakers can damage either the amplifier, the speakers or worst case both! NOTE: Guitar signal leads are not suitable and may fail causing damage to the speakers and or amplifier.
Page 6
Warranty Pulse products are warranted, by Pulse, against manufacturer defects for a period of one year from the original date of purchase. This warranty is limited to manufacturer defects, in either materials or workmanship. PULSE, or any other worldwide divisions of Premier Farnell PLC, is not responsible for any consequential or inconsequential damage to any other component, structure or the cost of installation or removal of said items.
Need help?
Do you have a question about the PMH200 and is the answer not in the manual?
Questions and answers
Where can I purchase a spare loudspeaker plug or plug and lead in Bristol for a PMH200 amplifier