Safety Information The lightning bolt To reduce the risk of electric The exclamation point within a triangle is shock, do not remove cover within a triangle is intended to alert the of this device. There are no intended to alert the user to the presence user serviceable parts user to important...
This amplifier is warranted from defects for one year from the date of purchase. Should your amplifier require service, either within or beyond that warranty period, please contact your Pulse Dealer or contact Pulse directly via info@pulse-audio.co.uk.
Page 4
Connections / Controls 1. DC Power Input – Supplied AC adaptor provides 24VDC, 3A with 100~240VAC, 50~60Hz input range. 2. Power ON/OFF Selector – Turns amplifier power on or off. When on, the blue LED immediately to the right of this switch will illuminate. 3.
Page 5
provides two line level input connections for convenience when using as two independent mono amplifiers. 6. Mic / Line Selector – Determines whether screw terminal inputs accept Mic level (5mV) or Line level (775mV) signal level. If you are not sure of your devices signal level, first use Line level. If signal level is very low, set the output volume to the lowest setting and select the Mic position.
Page 6
Compliance When this product reaches the end of its life, do not dispose with household waste. See www.recycle-more.co.uk for details of how to dispose of PULSE products in an environmentally sound fashion, or contact PULSE directly via www.pulse-audio.co.uk Pulse products are warranted, by Pulse, against manufacturer defects for a period of one year from the original date of purchase.
Need help?
Do you have a question about the SDA-40 and is the answer not in the manual?
Questions and answers