NETGEAR DVG1000 Quick Start Manual page 8

Step 5 - Connect computer
Connect the supplied yellow
Ethernet cable from the Modem
Router's yellow LAN1 port to your
computer's Ethernet port.
Step 6 - Connect power
Connect the power adapter to the
router then plug it into an electrical
outlet. Ensure electrical outlet is
powered on. Press the black power
button at the back of the Modem
Router to turn on the device.
Step 7 - Check installation
1. If the power is connected correctly, the POWER LED will light up.
2. If the grey telephone cable and the splitter are connected correctly,
the ADSL LED will flash and after a few seconds turn solid green.
3. Since the Modem Router is pre-configured, the INTERNET LED will
turn green after a few seconds.
4. If the yellow Ethernet cable is connected correctly, the
corresponding ETHERNET (LAN) LED will light up.
5. Once you have confirmed the above, open your web browser
(e.g. Internet Explorer, Chrome, Firefox or Safari) and go to your
favourite website.
Congratulations, you are now connected to the Internet.
8