Installation Checklist - Kenmore POWER MISER 153.335862 Owner's Manual

Power vent gas water heater
Table of Contents

Advertisement

Installation
Instructions
(cont'd)
Installation
Checklist
BEFORE LIGHTING
THE PILOT:
VENT PIPETO
OUTDOORS
Check the gas lines for leaks.
a. Use a soapy water solution•
DO NOT
test for gas leaks
usinga
match or open flame.
b. Brush the soapy water solution on all gas pipes, joints and
fittings.
c. Check
for bubbling
soap. This means
you have a leak.
Turn "OFF" gas and make the necessary repairs.
d. Recheck for leaks.
e. Rinse off soapy solution and wipe dry.
Is the new temperature-pressure
relief valve properly
installed
and piped to an adequate
dram.
See
Temperature-Pressure
Relief Valve" section.
Are the cold and hot water lines connected
to the water
heater
correctly?
See "Water
Piping"
instructions
in the
"Installing
the New Water Heater" section•
Is the water heater completely
filled w'th water? See "Filling'
instructions
in the "Installing
the New Water
Heater"
sec-
tion.
• Will a water leak damage anything? See the "Locating the
New Water Heater" section.
is there proper clearance between the water heater and any-
thing that might catch fire? See the "Locating the New water
Heater" section.
Do you have adequate ventilation
so that the water heater
will operate properly? See "Combustion
Air and Ventilation"
in the "Locat'ng
the New Water Heater'
section•
Is the draft hood vent piping properly secured? See "Venting"
"nstructions "n the "Installing the New Water Heater
sec-
tion.
Is there proper clearance between the vent pipe and anything
that might catch on fire? See "Venting" instructions in the
"Installing the New Water Heater" section.
• Is the vent pipe properly sloped and does the vent terminate
outdoors? See "Venting" instructions in the "Installing the
New Water Heater" section.
Do you need to call your gas company
to check the gas pipe
and its hookup?
HOT
SHUTOFF
VALVE
COLD
TEMPERATURE-
PRESSURE RELIEF
VALVE
GASSUPPLY
SHUTOFFVALVE -
DISCHARGE PIPE
(Do not cap or plug)
(Sediment trap)
PIPECAI
_0
ANS _1.10
--
I
I
I
MA;_,I_4
_IllGSTATIC
G_r_ p_ESBURE _ W.C
mm
I;,xx. t_UT
WN. O_T m
I_$_i_
W_C_
W_O_
W_C_
MODEL
RATING
PLATE
2O

Advertisement

Table of Contents
loading

Table of Contents