Changing The Fuel Filter - Husqvarna 50 Workshop Manual

10
Mount the carburetor to the air filter plate and insert the
retaining screws. Attach the throttle and (if equipped) the
choke linkage.
Install the carburetor. Make sure the gasket between the
carburetor and manifold is installed correctly. Tighten the
retaining screws evenly. Install the air filter plate to
crankcase retaining screw. The remainder of installation
is the reverse of removal.

Changing the Fuel Filter

The fuel filter is changed through the fuel filler opening
using tool P/N 5025083-01. After changing the filter,
make sure the external length of the fuel hose between
the fuel tank and the carburetor is 115 mm (4-1/2 in.).