Using Effect Pedals - Radial Engineering Tonebone Bassbone V2 User Manual

USING EFFECT PEDALS WITH THE BASSBONE
Effect pedals can be positioned in a number of ways depending on what
you are attempting to do. For example, you could have some effects
dedicated to one bass by inserting them between the instrument and the
Bassbone input.
PA
SYSTEM
You could also introduce a series of pedals between the Bassbone's ¼"
output and your amp. This way the pedals can be heard through your
amp but the effects will not be sent to the PA system if using the balanced
XLR output.
PA
SYSTEM
To take things one step further, the Bassbone is equipped with an unique
effects loop designed specially for bass. The effects loop lets you insert pedals
by depressing a footswitch and mix the effects with the original bass signal to
preserve the fundamental tone of your bass. You can also assign the effects
loop to channel-1, channel-2 or both, giving you absolute freedom. Connected
this way, the pedals will be heard through your amp and in the PA system.
PA
SYSTEM
10
Radial Engineering Ltd. Bassbone V2 Preamp