Part Names And Functions; Wired Remote Controller - Mitsubishi Electric Mr.Slim PLA-RP3AA Service Manual

2

PART NAMES AND FUNCTIONS

Indoor (Main) Unit
PLA-RP3AA.UK, PLA-RP4AA.UK, PLA-RP5AA.UK, PLA-RP6AA.UK
Horizontal Air Outlet
Sets airflow of horizontal automatically
during cooling or dehumidifying.

Wired remote controller

On the controls are set, the same operation mode can be repeated by simply pressing the ON/OFF button.
PLA-RP3AA.UK, PLA-RP4AA.UK, PLA-RP5AA.UK, PLA-RP6AA.UK
Operation buttons
TEMP. ADJUSTMENT button
This sets the room temperature. The
temperature setting can be performed
in 1: units
Setting range
Cooling 19: to 30:
Heating 17: to 28:
TIMER button
This switches between continuous
operation and the timer operation.
OPERATION SWITCH button
Press this button to switch the cooling,
electronic dry (dehumidify), automatic
and heating modes.
LOUVER button
This switch the horizontal fan motion
ON and OFF.
(Not available for this model.)
Air Intake
Intakes air from room.
TIME SETTING button
This sets the current time, start time
and stop time.
CENTRALLY CONTROLLED
ON OFF
CLOCK
CHECK
˚C
STAND BY
ERROR CODE
DEFROST
TEMP.
TIMER SET
PAR-20MAA
VENTILATION button
This sets the ventilation fan speed.
Filter
Removes dust and pollutants
from intake air
FAN SPEED button
This sets the ventilation fan speed.
ON/OFF button
This switches between the operation
and stop modes each time it is pressed.
The lamp on this button lights during
operation.
1Hr.
˚C
FILTER
CHECK MODE
TEST RUN
AIR DIRECTION button
FUNCTION
NOT AVAILABLE
ON/OFF
This adjusts the vertical angle of the
ventilation.
FILTER
CHECK TEST
FILTER button
This resets the filter service indication
display
CHECK-TEST RUN button
Only press this button to perform an
inspection check or test operation.
Do not use it for normal operation.
4
Grille
Auto Air Swing Vane
Disperses airflow up and
down and adjusts the angle
of airflow direction.