Hitachi BD-W80MV Operating & Installation Instructions Manual page 23

Removing the
transport bolts
rsons
in
op
Hose and cable
length
ectric
on and
es
How to Install the Washing Machine
■
Remove the four transport bolts and insert the cover caps using the
packed-in 13 mm box spanner.
■
The transport bolts must always be removed before using the washing
machine for the first time and must be retained for any subsequent
transport (e.g. when moving).
Do not remove these hose holders.
● Connection on the left side
●
Optimum Water Pressure :
(30kpa ~ 800kpa)
●
Use cold water from the tap
Water Supply Hose
● Connection on the right side
Power Supply
(220-240V 50Hz)
Power Cord
Remove the
transport bolts
Water Drain Hose (Approx. 105 cm)
Water Drain Hose (Approx. 160 cm)
Insert the
cover caps
Power Supply
(220-240V 50Hz)
Power Cord
Water Supply Hose
23
3WPL073501-1