Hitachi BD-W85TAE Operating & Installation Instructions Manual page 13

How to
use the
f
Auto Self Clean
function
h
y
n)
How to Use the Washing Machine
1. Press the Power button to turn on the power.
2. Select a program.
3. Press the Auto Self Clean button, and then press the
Start/Pause button.
■
The setting is switched off at the time of shipment from the factory.
Once it is switched on, the Auto Self Clean function operates every
time you do your laundry.
■
Prior to the final spin cycle, the outside of the tub, and the inside of the
outer tub are washed to eliminate dirt and mold.
■
To deactivate the Auto Self Clean function, press the
Auto Self Clean button again while the power is on.
●
The Auto Self Clean function runs just before the spin cycle
begins in each program.
●
The Auto Self Clean function cannot be set or cancelled while the
washing machine is operating.
●
The Auto Self Clean function is automatically cancelled when:
- Rinse Hold is set.
- No spinning is set.
●
Depending on the type and degree of dirt, some dirt may not be
removed by using the Auto Self Clean function.
●
If the washing machine is seldom used, some dirt may not be
removed by using the Auto Self Clean function.
●
To clean the tub more completely, we recommend using the
Tub Clean program along with the Auto Self Clean function.
■
The Auto Self Clean function is deactivated if one of the following
programs is selected.
- Duvet
- Rapid 15
- Wool
- Daily 60
- Tub Clean
- Spin
- Drain
13
3WPL090501