How to Install the Washing Machine
Connecting the
power
Level Adjustment
26
3WPL079591-2
■
Connect the washing machine to an alternating current via a correctly
installed earthed socket only.
■
The mains voltage must correspond to the voltage specifi cation on the
washing machine.
■
Connection specifi cations as well as the required fuses are stipulated
on the washing machine nameplate.
■
Do not plug the washing machine into an extension lead or power strip
with multiple sockets.
■
All four adjustable feet must be fi rmly on the ground. The washing
machine must not wobble.
■
Check the alignment of the washing machine with a spirit level, and
adjust the feet if it's not aligned.
1
Loosening
Elevating
Lock nut
Plastic base plate
Loosen the lock nut by
Lock nut
unscrewing in the arrow
direction
Adjustable leg
the unit with the adjustable
feet.
After adjustment, tighten
2
Tightening
the lock nut by screwing it
in the arrow direction
Tighten the lock nut until it
reaches the plastic base plate.
Adjustable leg is not over 25 mm.
1
then stabilize
2
.