Parallel Operation Outlets; Voltage Selector Switch - Honda Eu7000is Owner's Manual

CONTROL & FEATURES

Parallel Operation Outlets

These outlets are used for connecting the EU7000is to another
EU7000is generator for parallel operation (see page 39). A Honda
approved parallel kit (optional equipment) is required for parallel
operation. This kit can be purchased from an authorized Honda
generator dealer.
PARALLEL OPERATION OUTLETS

Voltage Selector Switch

Select the voltage before starting the engine.
Always disconnect or turn OFF all appliances or tools connected to the
generator before changing the voltage selector switch position.
The voltage selector switch changes generator output to produce 
''120 V ONLY'' or ''120/240 V''. If a 240 V appliance is connected to
the 4-prong receptacle, the switch must be in the ''120/240 V''
position. If only the 120 V 3-prong receptacles are being used, select
the ''120 V ONLY'' position.
Switch Position
120/240 V: The 120 V and 120 V/240 V receptacles can be used
simultaneously.
120 V ONLY: ONLY the 120 V receptacles can be used. Do not use the
120 V/240 V receptacle in this position. The most power will be
available at the 30 A 120 V locking plug receptacle.
VOLTAGE SELECTOR SWITCH
120 V/240 V
120 V ONLY
14