iHome iB2 Manual

Model: iB2
Stereo Headphones with
In-line Volume Control
Cord Managment
The hang tag at this top of the package also functions as a convenient cord
management device. Pass the headphone plug through the opening in the
hang tag as shown and then wind the headphone cord around the hang tag.
This will keep your headphone cord tangle free and always ready to use.
Using Your iHome Headphones
The earpieces are marked "L" and "R". Place the "L" earpiece in your left ear
and the "R" earpiece in your right ear for proper fit and best sound. If the
earpieces are inserted incorrectly they will not fit properly in your ears and the
sound quality will not be satisfactory.
Connect the headphone plug to the headphone jack of your music player. Be
sure that the plug is fully inserted into the jack. If the plug is not fully inserted
you may only hear sound from one earpiece.
To protect your hearing, always start listening with the In-Line Volume Control
set to a low level and gradually increase the volume to a comfortable listening
level.
Note: You may have to adjust the volume control on your music player as well
as the In-Line Volume Control on your headphones to find the most
satisfactory sound level. If one control is set too low and the other is set too
high, the sound may be distorted. Try setting the volume control on your
music player halfway between the Min and Max settings, and then use the
In-Line Volume Control on your iHome headphones to make final
adjustments.
IMPORTANT! Listening at high volume for long periods of time can result in
long-term hearing damage. For your safety, do not use headphones if they
would prevent you from hearing warning sounds, such as while driving a car
or motorcycle, riding a bike, etc.
NOTE: In extremely cold or dry air conditions you may notice a slight 'tingling'
feeling in your ears when using in-ear headphones. This is the result of the
build-up of static electricity in your body. This is normal and not an indication
of any problem with your headphones.