Gemini GEM-DXRP3 Operating Manual page 25

Instant Protection - Arming
without entry delay using the
button while remaining on the
premises.
INTERIOR ( ) Button -
p
Bypasses Interior Zones on arming
(see Zones - Interior Zones).
Keypad - Puts control-panel
functions at your fingertips. It can be
mounted anywhere in your premises.
Manager's Mode - In a partitioned
system, a low-security operating
mode that allows arming by area.
Panic Buttons - Blue buttons on
the keypad ( and
G 7
or ). If enabled, pressing
9
together with ,
7 8
will alert the central station of a fire,
auxiliary, or police emergency.
Partitioned System - A system
that has been subdivided into two or
more (up to eight) independent
G L O S S AR Y
subsystems (areas).
z
Pre-Alarm Warning. - A keypad
sounder alert of an impending alarm.
This option is programmable by zone
for the same duration as that
programmed for Abort Delay (see
Abort Delay).
Report - A transmission to a central
station notifying of a change in the
status of the system (alarm, trouble,
low battery, etc.).
RF Low Battery - (Wireless
systems only) Weak transmitter
battery.
RF Supervisory - (Wireless
,
8
systems only) Periodic test report
G
from transmitter (if a report is not
or received on time, a supervisory-
9
failure system trouble will result).
Ringback - A beep after arming
verifying the central-station's receipt
of a closing report.
Service Code - A code intended for
temporary use.
Sounder - A local warning device
at each keypad to alert that (a) entry
delay has started; (b) an attempt was
made to arm with a zone in trouble;
(c) a Day-Zone condition exists (see
Zones: Day Zone); (d) 10 seconds
exit time remaining; (e) invalid code
entered; or (f) central station
acknowledged arming (see
Ringback).
System Trouble - A problem (low
battery, power failure, etc.) detected
in the system.
Trouble - A zone fault; an open
door, window, or other problem that
may prevent arming.
User Code - Your personalized
code for arming and disarming the
system. It may contain up to six
digits.
25