IBM Personal Computer XT Manual To Operations page 47

Note: If you do not have an IBM
Communications Adapter Cable attached to
your system unit, go to the next page.
8
If you have an IBM Communications Adapter
Cable, it came with a wrap plug. Disconnect the
Communications Adapter Cable at the modem
end (refer to the Communications Adapter
Cable's "Option Installation Instructions" for
the cable-removal procedure).
9
See the figure below and install the wrap plug
(IBM part number 8529280) on the modem end
of the cable (end farthest from the system unit).
Communications Adapter
Cable Connector
(modem end)
/
Wrap Plug
Communications
Adapter Cable
April 1984
Start 20-3