Settings For The Display (Screen Setup) - Sony DVP-NS755V Operating Instructions Manual

Settings for the Display
(SCREEN SETUP)
Choose settings according to the TV to be
connected.
Select "SCREEN SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 73).
The default settings are underlined.
Selects the aspect ratio of the connected TV
Select this when you connect a
4 3
BOX
picture with bands on the upper
and lower portions of the
screen.
. 4 3
Select this when you connect a
displays a wide picture on the
entire screen and cuts off the
portions that do not fit.
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
I
Depending on the DVD, "4:3 LETTER BOX" may
be selected automatically instead of "4:3 PAN
SCAN" or vice versa.
Selects the color system when you play a
VIDEO CD.
AUTO Outputs the video signal in the
system of the VIDEO CD,
either PAL or NTSC. If your
TV is the DUAL system, select
AUTO.
Changes the video signals of an
P A L
NTSC VIDEO CD and outputs
it in the PAL system.
NTSC
Changes the video signals of a
PAL VIDEO CD and outputs it
in the NTSC system.
You cannot change the color system for DVDs.
l
You can change the color system of this player
l
according to the connected TV. See page 17.
The screen saver image appears when you
leave the player in pause or stop mode for 15
minutes, or when you play back a Super
Audio CD, CD, or DATA CD (MP3 audio)
for more than 15 minutes. The screen saver
will help prevent your display device from
becoming damaged (ghosting). Press D to
turn off the screen saver.
O N
Turns on the screen saver.
O F F
Turns off the screen saver.
I