Step3:Tvhookups - Sony DVP-NS755V Operating Instructions Manual

Step 3: TV Hookups
Connect the supplied audio/video cord and the power cord in the order (l-1-131) shown below.
Be sure to connect the power cord last.
Audio/video
cord (supplied)
to
or
To change the aspect ratio for the
connected TV
Depending on the disc and the TV type
(standard 4:3 screen TV or wide screen TV),
the image may not fit the TV screen.
If this happens, change the aspect ratio
When connecting to a TV that accepts
progressive 480~ (525~) format signals
You need to use the COMPONENT VIDEO
OUT jacks to view progressive signals. Hook
up your TV using pattern @ on page 20, and
then run Quick Setup on page 29.
to a
OUT
To change the color system (DVP-NS915V
The color system of the player can be set to
NTSC or PAL. If the on-screen display does
not appear on the TV, change the color
system of the player to match the color
system of the connected TV (NTSC or PAL).
To change the color system, hold I/& down
for a few seconds while pressing II on the
player.
TV
Power source
ower sourc6
*continued