Advertisement
MAGNETIC DOOR ALARM WITH KEYPAD
OPERATING INSTRUCTIONS
Home & Away Modes
Home mode when Home Mode is active all door/window sensors will immediately sound the alarm when opened.
Away mode will arm 45 seconds after you set it and alarm 30 seconds after it is activated. This allows you time to
exit or enter a room without sounding an alarm.
Alarm or Chime Mode
Alarm mode will set off a 120dB siren alarm sound when activated.
Chime mode will set off a chime sound when activated, ideal for small shops or offices.
Setting The Alarm
a. Slide switch on the left side of the alarm to the "Alarm" or "Chime" position.
b. Slide the switch on the right side of the unit to "Home" or "Away" mode.
Arming The Alarm
a. Input your four digit code.
b. The light will flash green to confirm the alarm has been set.
c. If the wrong code is entered a high pitch tone will sound and the light will flash red 3 times.
Disarming The Alarm
a. Input your four digit code.
b. The light will flash green to confirm the alarm has been disarmed.
Note: The alarm can be disarmed at any point after it has been activated
Changing Your Personal Alarm Code
If you need to change your Personal Alarm Code, the steps are the same as setting it the first time:
a. Press the "Reset" button and wait for the red light on the front of the alarm to start flashing.
b. Input and 4 digit code while the red light is flashing.
c. The light will change to green and flash 3 times to conifrm the code has been validated.
Model Number: IT414071C
Advertisement
