Table of Contents
Advertisement
6.
Firmware Upgrade
6.1
Save new firmware on a USB flash memory or on a PC.
6.2
Enter the ip address of the NVR via network browser. (Default NVR IP
address is 192.168.1.69).
6.3
Click [Firmware Upgrade]. Click [Browse] to locate new firmware on PC.
6.4
Click [upgrade] to begin firmware upgrade. Pay attention on the timer on
screen.
6.5
When complete, the system will reboot and show live viewing
automatically. The original setting of parameter remains unchanged.
6.6
If new firmware is saved on a USB flash memory, click [USB UPDATE] to
begin firmware upgrade.
30
Advertisement
Table of Contents
