Table of Contents
Advertisement
Search
1) Enter SEARCH menu, click [START], the system will generate a list of
cameras that are found and connected to the network. The number of
cameras that are found in the network is located on the top-right corner.
(Note: This does not mean the cameras are connected to the NVR).
2) Important! Click [STOP] to stop searching for cameras and proceed to
next step.
3) Check all IP addresses of network cameras and make sure there is no
duplication.
4) Set new IP addresses manually.
5) If the search to 16 or more IP CAM, select Next.
6) the user selects IP CAM Meanwhile, in the lower right corner will remind
the user has selected IP CAM quantity.
13
Advertisement
Table of Contents
