Tape Player; Playing A Tape; Continuous Play; Recording - RCA RS3532 User Manual

Tape Player

Playing a Tape

Tip: You can play a tape from either deck.
1. Press SOURCE repeatedly to select TAPE.
2. Press the cassette door to open it.
3. Insert a tape into the door and push the door
closed.
4. Press BAND/DECK 1/2 to select deck 1 or 2.
5. Press SKIP FORWARD / BACKWARD to position
the tape to the desired starting position.
6. Press PLAY.

Continuous Play

1. Press PRESET UP on the remote control to enable
continuous play. "C" will appear before the counter.
Insert a tape into deck 2 and press PLAY to start play-
back.
2. Insert a tape into deck 1.
3. When the tape in deck 2 finishes playback, deck 1
will automatically start playback.
Press PRESET DOWN to disable continuous play.

Recording

From Tuner

1. Insert a tape into deck 1.
2. Press SOURCE repeatedly to select TUNER and
press BAND to access the desired radio band.
3. Tune to the station to be recorded.
4. Press RECORD to begin recording.
5. Press STOP to end recording.

From CD

1. Insert a tape into deck 1.
2. Press SOURCE repeatedly to select CD.
3. Insert the disc(s) to be recorded.
4. Select the track, CD, or program to be recorded.
5. Press RECORD to begin recording.
6. CD begins to play.
7. Press STOP to end recording.
PUSH OPEN
DECK-1
REC/PLAYBACK
DIGITAL FULL LOGIC DECK
PUSH OPEN
DECK-2
PLAYBACK
DIGITAL FULL LOGIC DECK

Tape to Tape

Synchronize Recording
1. Insert the destination tape in deck 1.
2. Insert the source tape into deck 2.
3. Press RECORD . The playback and recording
start simultaneously.
Normal Recording
1. Insert the destination tape in deck 1.
2. Insert the source tape into deck 2 and press PLAY.
3. Press RECORD when ready to record.

From an Auxiliary Input

1. Insert the cassette in deck 1.
2. Check that the auxiliary device has been connect-
ed correctly to the AUX connector on the back of the
audio system.
3. Start playback on the auxiliary device.
4. Press RECORD to begin recording.
5.. Press STOP to end recording.
Tape Counter
You can keep track of tape position with the tape
counter. Press PROG. to reset.
EN