Important Safety Instructions - Kärcher K 2.19 Operator's Manual

IMPORTANT SAFETY INSTRUCTIONS

WARNING – When using this product
basic precautions should always be fol-
lowed, including the following:
Read all the instructions before us-
ing the product.
To reduce the risk of injury, close su-
pervision is necessary when a prod-
uct is used near children.
Know how to stop the product and
bleed pressures quickly. Be thor-
oughly familiar with the controls.
Stay alert – watch what you are do-
ing.
Do not operate the product when fa-
tigued or under the influence of alco-
hol or drugs.
Keep operating area clear of all per-
sons.
Do not overreach or stand on unsta-
ble support. Keep good footing and
balance at all times.
Follow the maintenance instructions
specified in the manual.
This Product Is Provided With A
Ground Fault Circuit Interrupter
Built Into The Power Cord Plug. If
Replacement Of The Plug Or Cord
Is Needed, Use Only Identical Re-
placement Parts.
WARNING – Risk of Injection or Injury –
Do Not Direct Discharge Stream At Per-
sons.
High pressure jets can be dangerous
if misused. The jet must not be di-
rected at persons, animals, electrical
devices, or the unit itself.
Wear safety goggles.
WARNING – Risk Of Explosion – Do
not spray flammable liquids.
Do not use acids and solvents in this
product. These products can cause
4
English
physical injuries to the operator and
irreversible damage to the machine.
CAUTION – Gun Kicks Back – Hold
with both hands.
The Trigger Gun Safety Lock pre-
vents the trigger from accidentally
being engaged. This safety feature
DOES NOT lock trigger in the ON
position.
WARNING – Risk of Electrocution –
Inspect cord before using – Do not
use if cord is damaged.
Keep all connections dry and off the
ground.
Do not touch plug with wet hands.
Do not use extension cord with this
product.
Connect to individual branch circuit
only.
Owner/User Responsibility
The owner and/or user must have an
understanding of the manufacturer's
operating instructions and warnings be-
fore using this pressure washer.
Warning information should be empha-
sized and understood. If the operator is
not fluent in English, the manufacturer's
instructions and warnings shall be read
to and discussed with the operator in
the operator's native language by the
purchaser/owner, making sure that the
operator comprehends its contents.
Owner and/or user must study and
maintain for future reference the manu-
facturers' instructions.
SAVE THESE INSTRUCTIONS