Panasonic DMC-LS85 Operating Instructions Manual page 90

Others
• This card has a format which is not recognized by the camera.
-+
Format the card again with the camera after saving necessary data on a PC etc. (P24)
~~tt~l:·.····";;';"'·;····'·;"·I(Jj~~~~~:i "":"':;iN~'
• This message appears when the camera is not operating properly.
-+
Turn the camera off and on. If the message persists, contact the dealer or your
nearest Service Center.
:~rr~;:'d
-+
Use a card compatible with this camera. (P15)
• You can only use an SDHC Memory Card if using cards with 4GB or more capacity.
""""'II;{ at!i!IEI./.·.' · ·······
.. :.:
~:,.~,"~;
'; .,.,
"'~"':
<
~':;:":<'; <',';,;':''::H:~:%::::'
• Failed access to the card.
-+
Insert the card again.
-+
Insert a different card.
• It has failed to read or write data.
-+
Turn the camera off and remove the card. Insert the card again, turn the power on,
and try to read or write the data again.
• The card may be broken.
-+
Insert a different card.
• When you set the picture quality to [WVGA] or [VGA], we recommend using a high-
speed card with "1 OMB/s" or greater displayed on the package.
• If the operation stops even if you use the card with memory size of 1OMB/s or greater,
this means the data-writing speed become lowered. We recommend backing up the data
and formatting the card. (P24)
• Depending on the type of SD Memory Card or SDHC Memory Card, motion picture
recording may stop in the middle.
• A folder cannot be created because there are no remaining folder numbers that can be
used. (P76)
-+
Format the card after saving necessary data on a PC etc. (P24)
!!.I8~::·
. .
, "w ..• ", ...,', ",."'"
':;;!i,~
' : ' l ..
."yen, ,
,:;m:';l~
• The AV cable is connected to the camera.
-+
Press [MENU/SET] if you want to delete this message at once.
-+
Select [TV ASPECT] in the [SETUP] menu to change the TV aspect. (P23)
• This message also appears when the USB connection cable is connected to the camera
only. In this case, connect the other end of the USB connection cable to a PC or a
printer. (P75, 77)
ui~ltII~I'fi:,;;II.g:<
• The printer cannot print.
-+
Check the printer.
90
VQT1X05