Philips MCP9350i Quick Install Manual page 22

QIG_MCP9350i_Eng_UK.qxd 01-11-2005
The Showline PC will tune all available channels. When complete ...
• Press the green start button in the centre of the remote control to access the media centre menu.
• Select Settings,TV, Guide, and Edit channels. From this screen it is possible to view each channel the media centre has
installed.
• Please review the channels one by one and untick any which have a poor or non existent picture.This will 'block' these
channels.When you have finished please save your selection.
• Return to the Guide menu and select Change Channel Order.The change channel menu lists the channels installed by
the Media center. Channels marked as 'blocked' have a poor or non existent picture.
• Follow the instructions on screen to place the channels in the order you wish to view them. For example, Channel 1 for
BBC1.
Media center installation with a Freeview set-top box
Configure Tuners,TV Signal and Guide
1 Confirm Your Region
• Check Current Region is correct and follow on-screen instructions
2 Automatic TV Signal Set-up
• Select 'I will manually configure my TV signal' and then click 'Next'
3 Select Your TV Signal
• If you are using a set-top box, Select 'Cable or digital cable' and then click 'Next'
4 Select Your TV Signal Type
• Select 'Analog Terrestrial (PAL/SECAM)'
5 Do You Have A Set-top Box?
• Select 'Yes'
6 Which Tuners Do You Want To Configure?
• If you are using one set-top box please tick check 'NVIDIA DualTV Tuner' only
• If you wish to connect two set-top boxes to your Showline PC also tick 'NVIDIA DualTV Tuner 2'
7 Prepare for Set-top Box Setup
• Follow on-screen instructions
8 Select A Working TV Signal
• Follow on-screen instructions
9 Set-top Box Remote
• Follow on-screen instructions
10 Identify Set-top Box Remote
• Follow on-screen instructions
11 Set-top Box Remote Identified
• Follow on-screen instructions
12 Select Number of Digits
• UK Set-top boxes operate with three digits
13 How Do You Change Channels?
• Select 'No, I just enter the channel number'
14 Test Channel Changing
Using the IR blaster with your set-top box. Follow on-screen instructions. If the channel does not change try selecting
'Try next IR control cable' and repeat.
> If you experience any difficulties please contact us on 0906 1010 017
If channels do not change correctly...
Change Channel Entry Method
• Select 'I am certain the channel entry method is correct'
Learn Set-top Box Remote
• Select 'Learn set-top box codes'
15 Set IR Signal Speed
• Follow on-screen instructions
16 IR Signal Speed Set
• This page is for information
17 Set Up Your TV Program Guide
• This page is for information
18 Guide Privacy
For 'Quick Start' we recommend you select 'No'.
If you choose to install the guide you will need to re-name and re-order the channels (see main instructions for use).
22
09:21 Pagina 22