Connecting Antennas; Inserting Batteries In The Remote Control - Philips MCP9350i Quick Install Manual

QIG_MCP9350i_Eng_UK.qxd 01-11-2005

Connecting antennas

TV antenna connection
1 Disconnect the TV antenna cable from the cable anten-
na system.
2 Connect the 10 cm TV antenna cable to the RF IN TV
socket (2) of the Media Center and to the cable
antenna system.
Radio antenna connection
1 Connect a coaxial cable (not supplied) to the RF IN
FM connector (1) of the Media Center.
2 Connect the other end of the cable to the cable anten-
na system.
If your are not connected to a cable antenna system, you
can use the FM cable.
1 Connect the FM cable to the RF IN FM (1) connector
of the Media Center.
2 Position and vary the direction of the FM antenna until
you find the strongest reception.Then secure the anten-
na in that position.
Inserting the batteries in the remote control
1 Remove the battery compartment cover and insert two
AA (1.5 V) batteries, noting the + and – configuration in
the battery compartment.
2 Replace the cover.
16
09:21 Pagina 16
Wallsocket
10cm
2 x