Conventional Mode - Motorola GM1200 Series User Manual

Conventional Mode

In the conventional mode the radio operates as a
standard two-way radio.
Select the personality "Conventional" as described
above. The display shows:
CHANNEL 01
Use the channel selector (16 & 17) to display the
desired channel.
Prior to transmission always make sure that the
channel is free (red LED not flashing). Press the
PTT key (19) to transmit, release it to listen. The red
LED lights while the radio transmits and flashes if
the channel is busy.
Some channels may be monitored for activity by
pressing the monitor button
be lit until the channel is changed or the monitor
button (6) is pressed again. The
C
light briefly when the microphone is taken out of its
holder. Please consult your dealer for further
information.
CH 01
(6). The icon will
C
icon will also
Personality Selection/Conventional Mode
Personality Selection
In the conventional mode the radio is equipped with
a time out timer. A speech limitation warning will
sound a few seconds before the transmitter is
switched off. The call timed out tone will sound, until
the PTT is released.
To generate the DTMF tones press and hold the
PTT (19) while entering the desired number.
15
English