Advertisement
Available languages
Available languages
Review
this chart to find do-it-yourself
solutions
for a minor
performance
problems.
Additional
service
needed,
other than those
described
in this owner's
manual,
should
be performed
at Sears
Parts &
Repair
Center.
WARNING
Electrical
shock
and personal
injury
hazard.
Disconnect
electrical
supply
before
servicing
or cleaning
the unit.
Failure
to
do so could
result
in electrical
shock
or personal
injury.
CLEANER
wILL
1} Unplugged
at wail 0uilet.
1. Plug in firmly, check circuit breaker/fuse.
NOT RUN
2. Switch in off position.
2. Push switch to floor or carpet mode.
3. Thermal protector
activated
3. See "To correct problem",
page 9.
POOR JOB OF
DIRT PICKUP
1. Full or clogged dust bin.
2. Broken agitator belt.
3. Clogged
hose or nozzle.
4. Hose not inserted fully
5. Worn agitator.
6. Hole in hose
7. Dust bin assembly
improperly
installed.
8. Belt not installed on motor shaft.
9. Motor protection
system
activated.
10. Agitator overload
protector
activated
1. Empty dust bin and clean the filters
2. Replace agitator belt.
3. Clean hose or nozzte area.
4. Insert hose
5. Replace agitator.
6. Replace hose.
7. Properly install dust bin assembly
8. Install belt on the motor shaft
9. Check for clogs
1O.See "To correct problem",
page 9.
DUST ESCAPES
1. Dust bin assembly
improperly
1. Properly install dust bin
THE DUST BIN
installed.
LIGHT WILL NOT
1. Burned out light bulb.
1. Replace light bulb.
WORK
-16-
Advertisement
