Advertisement
Available languages
Available languages
Review this chart to find do-it-yourself
solutions for minor performance
problems. Any service
needed, other than those described
in this owner's manual, should be performed
by a Sears
Service Center.
Cleanerwon't start.
Poorjob of dirt
pick-up.
Cleanerstarts but
cuts off.
Power-Mate*will not
run when attached.
Cleaner picks up moveable
rugs -or- Power-Mata •
pushes too hard,
Ught won't work,
Cord won't rewind.
Cleaner leaves marks
on carpet.
1. Unplugged at wall outlet.
2. TrippeddrouJtbreaker/blown f use
at household servicepanel.
3. Loose hoseelsctrical connections.
4. Trippedthermalprotector in
canister.
1. Fullor doggeddustbin.
2, Cloggedairflow passages.
3. Dirtyrdters.
4. Wrongpile heightsetting,
5. Open suctioncontrol.
1. Plugin firmly, p ush ON/OFF switch to
ON.
2. Resetcircuitbreakeror replecefuse.
3. Reconsecthoseends, (page7).
4. Resetthermal protector, (page 12).
1. Emptydustdin,(page 14).
2. Clear airflow passages, ( page 13).
3. Clean'change filters, ( page 15, 16)
4. Adjustsetting, ( page10),
5. Adjustcontrol, (page 9).
6. Holein hose.
6. Replacehose.
7, WornPower-Mate®brushes.
7. Changebrushes, (page 20).
8. Wornor broken belt.
8 & 9. See BELTCHANGINGANDAGITATOR
9. Dirtyagitatoror end caps.
1. Hoseetec&icel c onnections.
2. Trippedoverloadprotector in
Power-Mate".
3,
Tripped thermal protector
in canister.
1, Power-Mate • cerv,,ections
unplugged.
2. Wornor broken belt.
3. DHy agitatoror end caps.
4. Trippedovadoedprotector in
Power-Mate _
1, Wrongpile heightsetting.
2. Sud, J ontoostrong.
1. Burned outlightbulb,
1. Dirty power cord.
2. Cord jammed.
t. Wrong vacuuming pattern.
CLEANING,(pages 17-18).
t.
2.
Check connections, reconnect h ose
ends, (page7).
Removeany itemsthat may be caught
or jammed,then reset(page 12). If
cleanerstartsandstopsagain,clean
agitatorandend caps,then reset
(pages17-18).
3. Resetthermal protector, ( page 12).
1. Plug in firm/y, ( page6).
2&3,
4.
See BELTCHANGINGAND AGITATOR
CLEANING,(pages 17-18).
Checkagitatorarea forexcessive lint
build-uporjamming(page12). and
Clean agitator, e ndcaps,thenreset,
(pages 17-1B).
1. Adjust setting, (page 8).
2. Adjust suction c ontrol, (page 9).
1. Changelight bulb, (page 19).
1. Clean the powercord.
2. Pulloutcordandrewind.
t, See VACUUMINGTIPS, (page 10).
20
Advertisement
