Connecting A Camcorder; Installing Batteries In The Remote Control - RCA CR20805 User Manual

I
NSTALLATION

Connecting a camcorder

You can use your TV's front panel jacks to connect a camcorder,
which enables you to view camcorder tapes without a VCR.
The audio and video cables mentioned in the steps below are usually included with
a camcorder. You can also purchase them at your local electronics store.
1 Locate the camcorder's A/V output jacks on the camcorder.
1
2 Connect an audio cable to the camcorder's AUDIO OUT terminal.
2
Camcorder
Output Jacks
OUTPUT
AUDIO VIDEO
Audio Cable
3
3 Connect the other end of the cable to the AUDIO IN terminal on the
front panel of your TV .
Camcorder
Output Jacks
OUTPUT
AUDIO VIDEO
Audio Cable
4 4 Connect a video cable to the camcorder's VIDEO OUT terminal.
Camcorder
Output Jacks
OUTPUT
AUDIO VIDEO Video Cable
5
5 Connect the other end of the cable to the VIDEO IN terminal on the
front panel of your TV.
Camcorder
Output Jacks
OUTPUT
AUDIO VIDEO Video Cable

Installing batteries in the remote control

1 1 Pull the cover completely off the back of your remote control.
2 Install two AA size batteries. Make sure to match the + and
2
– ends of the batteries with the diagram inside the compartment.
VIDEO-IN-AUDIO
3 Replace the lid.
3
Remove the batteries and store them in a cool, dry place if you won't be using the
remote control for a long time.
The remote control can be used up to about 23 feet from the TV.
Batteries last for about one year.
VIDEO-IN-AUDIO
C T : I
HAPTER WO NSTALLATION
9