Table of Contents
Advertisement
TV O
PERATION
Viewing the on-screen displays
Your TV provides you with on-screen displays. To see the displays:
1
With the power on, press DISPLAY.
1
The on-screen display will show the channel you are watching, the
time of day. When the present time is set, "Timer On" or Timer Off"
is displayed on the screen.
ANT 11
CC
2:48pm
Sleep 10
To remove the displays, press DISPLAY a second time.
Setting the sleep timer
The sleep timer allows you to select the length of time your TV
remains on before turning off automatically. This is especially
convenient if you like to fall asleep with the television on.
18
C
T
: TV O
HAPTER
HREE
PERATION
Repeatedly press the SLEEP button to set the amount of time you
1
want the TV to remain on.
A display will appear in the corner of the screen.You can set the
timer for one of the following lengths of time: 10, 20, 30, 60, 90, 120,
150, 180, 210, 240, 270, 300, 330 or 360 minutes.
2
To cancel the sleep timer, press SLEEP until the on-screen display
2
reads "Off." You can also cancel the sleep timer by turning the TV
off, then turning it on again.
Viewing a VCR or camcorder tape
When you connect a VCR or camcorder to your TV with the A/V jacks,
you need to adjust your TV. To do this:
1
1
Press the TV/VIDEO button when you wish to view a video tape, a
video game, or any signal from equipment connected to the TV's
A/V jacks.
If you do not have any equipment connected to the A/V jacks, the TV will
display the message, "Connect Audio/Video jacks."
2
If you have components connected to both the front and rear A/V
inputs, the TV will display the signal from the front A/V jacks only.
If you have a component connected to either the front or rear A/V
inputs (but not both), the TV will automatically tune to the input
being used.
To return to normal TV viewing, press TV/VIDEO again.
2
Advertisement
Table of Contents
