Connecting A Camcorder; Installing Batteries In The Remote Control - RCA MR13401 User Manual

1547278C 11/14/01 2:32 PM
I
NSTALLATION

Connecting a camcorder

You can connect a camcorder to your TV, which enables you to view
camcorder tapes without a VCR.
 The audio and video cables mentioned in the steps below are usually included with
a camcorder. You can also purchase them at your local electronics store.
1 Locate the camcorder's A/V output jacks on the camcorder.
1
2 Connect an audio cable to the camcorder's AUDIO OUT terminal.
2
Camcorder
Output Jacks
OUTPUT
AUDIO VIDEO
Audio Cable
3 3 Connect the other end of the cable to the TV's AUDIO IN terminal.
Camcorder
Output Jacks
OUTPUT
AUDIO VIDEO
Audio Cable
4 4 Connect a video cable to the camcorder's VIDEO OUT terminal.
Camcorder
Output Jacks
OUTPUT
Video Cable
AUDIO VIDEO
5 5 Connect the other end of the cable to the TV's VIDEO IN terminal.
Camcorder
Output Jacks
OUTPUT
Video Cable
AUDIO VIDEO
Page 13
MENU
VIDEO-IN-AUDIO
MENU -
VIDEO-IN-AUDIO

Installing batteries in the remote control

1 1 Pull the cover to the full to take it out
2 Install two AA size batteries. Make sure to match the + and
2
– ends of the batteries with the diagram inside the compartment.
3 Replace the lid.
3
 Remove the batteries and store them in a cool, dry place if you won't be using the
remote control for a long time.
 The remote control can be used up to about 23 feet from the TV.
C
HAPTER
T : I 9
WO NSTALLATION