Kenmore 15243 Owner's Manual page 30

Bobbin Winding
Removing bobbin case
Remove the extension table from the machine by pulling
it to the left. Open the shuttle cover_) by pulling down
the embossed part on the left of the cover.
Raise the needle to its highest position by rotating the
handwheel toward you.
(_ Shuttle cover
_) Bobbin case
bobbin.
[] Draw thread from the spool.
[] Guide the thread around the thread guide.
[] Thread through the hole in the bobbin from the inside to
the outside,
[] Put the bobbin on the bobbin winder spindle,
[]
J
[] []
[]
18