Bar Tacking - Kenmore 1020 Owner's Manual

|
Step 1 Step 2
1. Set special stitch dial at r'l and bartack several times at the marked
beginning of the buttonhole. Stop sewing at the left stitch. Raise
needle to its highest position by turning handwheel toward you
manually.
2. Set special stitch dial at "iq. Stitch forward until the hinged portion of
the presser foot aligns with the dot on the left side of the buttonhole
guide foot. The toe of the presser foot will be touching the end of the
guide foot.
Stop
sewing at the left stitch and raise needle to its highest
position as in Step 1.
Step 3
Step 4
3. Set special stitch dial at E] again and bartack several times. Raise
needle at its highest position as in steps 1 & 2.
4. Set special stitch dial at G. and continue sewing until the hinged
portion of the presser foot aligns with the dot on the right side of the
guide foot. You will have reached the bartacking done in Step 1.
31