Product Registration; Package Contents; Housing Size And Weight; Preparation - Ikelite Compact Video Housing Instruction Manual

Product Registration

Please take a moment to fill out the online Ikelite Product Registration
form at http://www.ikelite.com/forms/regForm.htm.

Package Contents

- Compact Video Housing
- Silicone Lubricant
- Lanyard
- UR/Pro Color Correcting Filter

Housing Size and Weight:

5.5 in. wide x 4.5 in. high x 3.0 in. deep (including controls and lens port).
140mm x 114mm x 76mm.
Less than 1.2 lb (544g) above water.
Slightly positive buoyancy underwater.

Preparation

This product has been water pressure tested at the factory and is depth
rated to 200 ft. (60m). Thoroughly inspect and immerse the empty
housing completely in water before installing a camera. If any fogging
occurs or droplets of water enter the housing, do not install a camera.
Clean the housing main o-ring and retest to make sure that it is
watertight. Refer to the Troubleshooting section, page 11.
We suggest that you read this instruction booklet thoroughly before use
to have a full understanding of where each camera control is located,
and what function each control provides. Please read your camera
manual thoroughly to have a full understanding of each camera function.
If you are new to underwater photography, be sure to read the Video
and Photo Tips section - page 10.
Due to the power required to operate the camera and LCD screen start
each dive with a fully charged camera battery.
- Diffuser
- Deflector
- Extra Control Tips
3