Advertisement
PRODUCT REFERENCE GUIDE
Thank you for purchasing a quality VALCO product. Please read and follow the instructions outlined in this
guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all
the warnings and safety guidelines before use.
Retain this guide in a safe place for future reference.
Due to our policy of continuous product development, this product is
constantly evolving. It is possible that some features or procedures outlined
here have changed since this document was written.
If you are unsure of any procedure shown here, please contact us via the web
at info@valco.com.au to obtain the most up to date information before use.
Include the batch number, which can be found on a sticker on the frame.
All pictures and diagrams herein are provided for illustration purposes only.
Actual product, colour or fabric may vary. VALCO reserves the right to modify
or alter any specification or colour without notice or obligation to modify any
product previously purchased
REBEL Q STROLLER
BASSINET ACCESSORY
WITH OPTIONAL
FURTHER INFORMATION
In Australia/New Zealand
www.valco.com.au
In North America only
www.valcobaby.com
1800 610 7850
© Copyright VE 2011
vs020811
Advertisement
Table of Contents
Related Manuals for Valco baby REBEL Q
Summary of Contents for Valco baby REBEL Q
- Page 1 REBEL Q STROLLER WITH OPTIONAL BASSINET ACCESSORY PRODUCT REFERENCE GUIDE Thank you for purchasing a quality VALCO product. Please read and follow the instructions outlined in this guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all the warnings and safety guidelines before use.
-
Page 2: Installing/Removing The Wheels
ASSEMBLY OPENING YOUR STROLLER FIGURE A 1. Remove the stroller from the carton and dispose of all packaging responsibly. The front wheels, rear wheels, seat, bumper bar and hood all need to be installed prior to use 2. Lay the stroller frame flat on the ground with the handle facing upwards. -
Page 3: Installing The Seat
FIGURE E - FRONT WHEEL LOCK 13. The front wheels of your stroller offer either a full, 360º swivel action or a locked position. 14. To lock the front wheel, turn the wheel so that the bulk of it is beneath the stroller and push down on the wheel lock (14) until it locks into position. -
Page 4: Footrest Adjustment
FOOTREST ADJUSTMENT FIGURE I - FOOTREST ADJUSTMENT 27. To adjust your footrest, simultaneously press the two adjusting buttons on either side of the footrest and move it up or down to the desired position. SEAT ADJUSTMENT FIGURE J - SEAT ADJUSTMENT 28. -
Page 5: Folding Your Stroller
FIGURE M - FOLDING 36. Lower the seat to the full recline position. Note: This is not necessary for folding but will ensure that your Rebel Q stroller is at its most compact when folded. 37. Fold the hood back against the frame. -
Page 6: Tether Strap
OPTIONAL BASSINET BASSINET ASSEMBLY FIGURE R - CONTENTS 1. Remove the Rebel Q Bassinet from the carton and dispose of all packaging thoughtfully. 2. Lie the bassinet on a flat surface, ‘bottom’ down. PLEASE NOTE THAT THE HOOD OF YOUR REBEL Q BASSINET IS ATTACHED TO THE BASSINET BODY AND CANNOT BE REMOVED. - Page 7 FIGURE H 16. To fix your bassinet to your Rebel Q frame, line up the fixing housing with the corresponding connectors located on either side of the stroller frame.
-
Page 8: Care And Maintenance
• DO NOT use any bleach based products to clean the Rebel Q. • The Rebel Q can be cleaned using a damp sponge and mild detergent. • The mattress sheet and the inner lining are both removable and may be gentle machine washed. Line dry only.
Need help?
Do you have a question about the REBEL Q and is the answer not in the manual?
Questions and answers