Table of Contents
Advertisement
Quick Links
PRODUCT REFERENCE GUIDE
Thank you for purchasing a quality Valco Baby product. Please read and follow the instructions outlined in this
guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all
the warnings and safety guidelines before use.
Important: Please read the following instructions carefully before assembling this product. Retain this
guide in a safe place for future reference.
FURTHER INFORMATION
In Australia/New Zealand
www.valco.com.au
www.valco.co.nz
In North America only
www.valcobaby.com
1800 610 7850
TRIMODE
TWIN EX
Due to our policy of continuous product
development, this product is constantly
evolving. It is possible that some
features or procedures outlined here
have changed since this document
was written. If you are unsure of any
procedure shown here, please contact
us via the web at info@valcobaby.com
to obtain the most up to date information
before use. Include the batch number,
which can be found on a sticker on the
frame.
All pictures and diagrams herein are
provided for illustration purposes only.
Actual product, color or fabric may vary.
Valco Baby reserves the right to modify
or alter any specification or colour
without notice or obligation to modify any
product previously purchased
STOLLER
© Copyright VE 2009
Advertisement
Table of Contents
Related Manuals for Valco baby TRIMODE
Summary of Contents for Valco baby TRIMODE
- Page 1 STOLLER PRODUCT REFERENCE GUIDE Thank you for purchasing a quality Valco Baby product. Please read and follow the instructions outlined in this guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all the warnings and safety guidelines before use.
-
Page 2: Installing The Wheels
Opening the strOller chassis FIGURE A 1. Lay the stroller flat on the floor and carefully cut the cable tie which holds the frame. To unfold the chassis, locate the rear legs. NOTE: The rear centre leg is highlighted in red. 2. - Page 3 FIGURE F Your Twin Tri-mode stroller utilizes our unique and revolutionary new DUAL TRIMODE ™ front swivel system: 10. Tilt the stroller frame upward so that it rests on the handle and the rear wheels.
- Page 4 installing the eXpanda hOOds FIGURE H 18. Identify left and right side hoods by determining that the sliding housing (Image K) sits on the SIDE (a) of the frame, and the puzzle housing (b) (Image J) rests on the centre (c) of the stroller. FIGURE I Turn your stroller around to the back: 19.
-
Page 5: Seat Recline
Using the eXpanda hOOd FIGURE M The Expanda hood unzips, increasing the size of your standard hood, to give greater coverage and protection from the sun and weather for your child. To open the Expanda hood: 26. Locate the zip in the center of the Expanda Hood and unzip completely 27. -
Page 6: Folding The Stroller
Using yOUr brakes FIGURE Q 36. To engage: Press down on the centre pedal until the brake pins engage in the nylon brake cogs in the wheel hub. IMPORTANT: ALWAyS ChECk ThAT ThE bRAkE hAS ENGAGED bEFORE USE, IF NOT yOU MAy NEED TO MOvE ThE STROLLER FORWARD OR bACk SLIGhTLy UNTIL IT LOCkS INTO PLACE. -
Page 7: Using The Harness
80%* of the sun’s harmful UV rays. (* tested to Australian Standard 4399) tether strap airgO™ Your stroller has been Your Twin Trimode equipped with a safety has been designed tether strap. This strap to maximise air flow... - Page 8 MAy Be in the iMMeDiAte ViCinity oF your stroller. • it MAy Be unsAFe to use Any ACCessories other thAn VAlCo BABy ApproVeD ones. • this proDuCt is intenDeD For DoMestiC use only. it is not intenDeD For CoMMerCiAl use.
Need help?
Do you have a question about the TRIMODE and is the answer not in the manual?
Questions and answers