Valco baby TRI MODE EX Product Reference Manual

Valco baby TRI MODE EX Product Reference Manual

Advertisement

valco
baby
PRODUCT REFERENCE GUIDE
Thank you for purchasing a quality Valco Baby product. Please read and follow the instructions outlined in this
guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all
the warnings and safety guidelines before use.
Important: Please read the following instructions carefully before assembling this product. Retain this
guide in a safe place for future reference.
FURTHER INFORMATION
In Australia/New Zealand
www.valco.com.au
www.valco.co.nz
TRI MODE EX
In North America only
www.valcobaby.com
1800 610 7850
Due to our policy of continuous product
development, this product is constantly
evolving. It is possible that some
features or procedures outlined here
have changed since this document
was written. If you are unsure of any
procedure shown here, please contact
us via the web at info@valco.com.au to
obtain the most up to date information
before use. Include the batch number,
which can be found on a sticker on the
frame.
All pictures and diagrams herein are
provided for illustration purposes only.
Actual product, colour or fabric may vary.
Valco Baby reserves the right to modify
or alter any specification or colour
without notice or obligation to modify
any product previously purchased
© Copyright VE 2009

Advertisement

Table of Contents
loading

Summary of Contents for Valco baby TRI MODE EX

  • Page 1 PRODUCT REFERENCE GUIDE Thank you for purchasing a quality Valco Baby product. Please read and follow the instructions outlined in this guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all the warnings and safety guidelines before use.
  • Page 2: Rear Wheels

    assembly FIGURE A 1. Remove the stroller from the carton and dispose of all packaging thoughtfully including the black rubber protectors on either side of the brake bar and front wheel protector. The front wheel forks, rear wheels, front bar and hood all need to be installed prior to use.
  • Page 3: Folding Your Stroller

    (Retain for future use, plugs must be inserted if the bar is removed and the housings are not in use for a Valco Baby approved accessory) 11. Insert the bar ends into the nylon housing located on either side of the frame.
  • Page 4 FOlDING yOUR sTROlleR cont’d. FIGURE I 26. Simultaneously lift the secondary safety catch and swing the handle forward. FIGURE J 27. Holding the frame at the rear, press down with your foot on the rear basket tube. This will disengage the basket side hinge locks.
  • Page 5: Seat Recline

    OPeNING yOUR sTROlleR cont’d FIGURE M 32. Press down on the side locking hinges (on the basket) to lock the frame in the open position. 33. Secure the handle to the frame by engaging the locking clamps on both sides. IMPORTANT WARNING: ALWAYS TEST THAT ALL LATCHES AND LOCKS ARE SECURELY ENGAGED BEFORE USE.
  • Page 6 UsING THe exPaNDa HOOD FIGURE Q The Expanda hood unzips, increasing the size of your standard hood to give greater coverage and protection from the sun and weather for your child. To open the Expanda Hood: 42. Locate the zip in the center of the Expanda Hood and unzip completely 43.
  • Page 7: Using The Harness

    UsING THe HaRNess Your child MUST always be harnessed while in the stroller. PRESS HOLD FIGURE T DOWN DOWN RELEASE HOLD TO OPEN YOUR HARNESS: 50. Push down on both buckle prongs and hold. 51. Simultaneously press the release button in the centre PUSH of the buckle.
  • Page 8 WaRNING • FOLLOW THE MANUFACTURER’S INSTRUCTIONS. • PUT ON ALL THE BRAKES WHENEVER YOU PARK THE PRAM/STROLLER. • DO NOT LEAVE CHILDREN UNATTENDED. • DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS PRAM/STROLLER. • MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU ADJUST THE PRAM/STROLLER. OTHERWISE THEY MAY BE INJURED.

Table of Contents