Kenmore 795.7109 Series Use And Care Manual page 19

Energy Saver
The Energy Saver function disables the mullion heater
located on the refrigerator door in order to conserve
electricity. Press and hold the Energy Saver button for
3 seconds to activate or deactivate this function.
NOTE: Discontinue using the Energy Saver function
if excessive moisture begins to collect on the door
mullion.
Articulatlng Mulllon
This feature is a metal strip attached to the left door
that articulates (rotates) 90 degrees as the door is
closed, forming a mullion (base) for the left and right
door gaskets to seal against.
Caution When Closing the Door
To reduce the risk of scratching the door or breaking the
door mullion, please make sure that the refrigerator door
mullion is always folded in.
Control Lock _
P_ss & HOLD
When power is initially connected to the refrigerator,
the Lock function is off.
* if you want to activate the Lock function to lock other
buttons, press and hold the Door Alarm button for
three seconds or more. The Control Lock icon will
display and the Lock function is now enabled.
* When the Lock function is activated, no other buttons
will work. The dispenser pad is also deactivated.
To disable the Lock function, press and hold the Door
Alarm button for approximately three seconds.
Temperature Mode Switch Function (°F <=>°C)
if you want to convert °F to °C or vice versa, press and
hotd the Freezer Tamp and Refrigerator Tamp buttons at
the same time for approximately five seconds.
Demo Mode (For Store Use Only)
The Demo Mode disables all cooling in the refrigerator
and freezer sections to conserve energy while on display
in a retail store. When activated, OFF will display on the
control panel.
To deactivate:
With either refrigerator door opened, press and hold
the Refrigerator Temp and Ultra Ice buttons at the same
time for five seconds. The control panel will beep and the
temperature settings witl display to confirm that Demo
Mode is deactivated. Use the same procedure to activate
the Demo Mode.
Door Alarm ((_))
When power is connected to the refrigerator, the door
alarm is initially set to ON. When you press the Door
Alarm button, the display will change to OFF and the
Door Alarm function will deactivate.
When either the refrigerator or the freezer door is left
open for more than 60 seconds, the alarm tone will
sound to let you know that the door is open.
When you close the door, the door alarm will stop.
19
MFL62184418 DDDDD.indd 19 2011.4.7 11:54;16 AM