Using Your Refrigerator; Setting The Controls - Kenmore 795.7109 Series Use And Care Manual

Kenmore refrigerator user manual
Table of Contents

Advertisement

SETTING THE CONTROLS
AIRFLOW
Be sure not to block vents while packing
your refrigerator.
Doing so will restrict airflow
and may cause the
refrigerator
temperature
to become too warm or cause
interior
moisture buildup.
(See air flow diagram
below.)
Dispenser
Press the Ice/Water
Select button to select
either Water, Cubed
Ice or Crushed Ice. The
selected option will
illuminate.
Some dripping
may
occur after dispensing.
Hold your cup beneath
the dispenser for a few
seconds after dispensing
to catch all of the drops.
NOTE: The dispenser will not work if any door is left open
or if the control lock is engaged.
_, CAUTION:
The control display is operated
by
touch. Excessive moisture on the display may cause a
malfunction.
Please keep the display
clean and dry.
Temperature
The Refrigerator Temp Control ranges from 33°F to
46°F (0°C to 8°C). Press the Refrigerator
Temp button
to cycle through the available
temperature
settings one
increment at a time.
The Freezer Temp Control range is from =6°F to 8°F
(=21°C to =13°C). Press the Freezer Temp button to
cycle through the available
temperature
settings one
increment at a time.
NOTE: When changing
control settings, wait 24 hours
before
making additional
adjustments.
The controls are set
correctly
when milk or juice is as cold as you would like
and when ice cream is firm. If the temperature
in either
compartment
is too cold or too warm, change the setting
one increment
at a time. Wait 24 hours for the change to
stabilize
before adjusting
again.
Ultra ice
When you touch the Ultra Ice button, the graphic
will
illuminate
in the display and will continue for 24 hours.
The function
witl automatically
shut off after 24 hours.
You can stop this function
manually
by touching
the
button one more time.
*
This function
increases both ice making and freezing
capabilities.
Water Filter Reset
CHANGE
FILTER
When the water filter indicator
turns on, you have
to change the water filter. After changing
the water
filter, press and hold the Ultra Ice (Water
Filter Reset)
button for three seconds to turn the indicator
light off.
You need to change the water filter approximately
every six months.
18
MFL62184418
DDDDD.indd
18
2011.4.7
11:54;15 AM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents