Reinstalling the right (refrigerator) d oor
5.Reconnect thewatertubesbyinserting thetubesinto
theconnectors.
Type1
Type 2
1.Place thedoorontothelowerhingepin.
2. Fittophinge(4)overhingeleverlatch(5)into
place.Rotate lever(3)counterclockwise tosecure
hinge.
NOTE: R egardless ofhingelevertype,reinstallation
process i s thesame.
3.Hooktabonswitchsideofcorner u nderedgeofwire
opening in cabinet top.Position cover(2)intoplace.
Insertandtighten coverscrew(1).
Reinstalling the left(freezer)door
S'
(1)\
(4).
1. Feed the water tubes through the lower hinge pin and
place the door onto the lower hinge pin.
2. Fit top hinge (6) over hinge lever latch (7) and into
place. Rotate lever (5) clockwise to secure hinge.
NOTE: Regardless of hinge lever type, reinstallation
process is the same.
3. Install the grounding screw (4) and connect all the
wire harnesses (3).
4. Hook tab on door switch side of cover (2) under edge
of wire opening in cabinet top. Position cover into
place. Insert and tighten cover screw (1).
10