Taillamp, Tail/Stop Lamp, Rear Marker Lamp (Coupe Models); Taillamp; Rear Marker Lamp - Dodge Viper SRT10 ROADSTER 2010 Owner's Manual

3. Turn the appropriate bulb and socket assembly coun-
terclockwise, and then pull it out of the upper lamp
assembly.
1 — Rear Marker Lamp
2 — Tail/Stop Lamp
3 — Taillamp
MAINTAINING YOUR VEHICLE 255
4. Pull the bulb out of the socket assembly.
5. Push the replacement bulb into the socket assembly.
6. Reinstall the bulb and socket assembly into the upper
lamp assembly, and then turn it clockwise.
7. Install the access panel and the two fasteners.
8. Close the trunk.
Taillamp, Tail/Stop Lamp, Rear Marker Lamp
(Coupe Models)
For bulb replacement, see your authorized dealer.
7