Table of Contents
Advertisement
The Samson C•control headphone amplifier utilizes the latest technology in gain management design. Here are
some of it's features:
•
Speaker and input source selector providing a convenient centralized point for routing and listening to
stereo sources over various monitor speakers.
•
3-way line level speaker selector providing A/B or A/B plus C switching.
•
Three 2-track / Stereo Inputs can be used to connect DAT, CD, MINIDISK, sub-mixers, MIDI rigs or any
other stereo line level source.
•
Four stereo Source switches are used to route any of the connected stereo sources to the monitor out-
put.
•
Headphone Output with Level control for listening.
•
Control Room VOLUME knob is used to adjust the overall level of the connected monitor speakers.
•
SPEAKER 2 VOLUME control is used to level match SPEAKER 1 and SPEAKER 2 so that they are at
the proper level when switched.
•
Talkback Mic with momentary TALK switch and LEVEL control picks up conversation from the engineer
and/or producer to talent over the CUE output.
•
TALK TO CUE switch, when engaged, routes the internal TALKBACK microphone to the CUE output
allowing the engineer and/or producer to talk to the talent on the other side of the glass.
•
TALK TO 2-TR switch, when engaged, routes the internal TALKBACK microphone to the 2-track outputs
allowing the engineer and/or producer to print a cue like " soda jingle track seven" to the final two-track
mix.
•
Mono switch is used to check mixes for mono compatibility, and when engaged, all the input sources are
summed to a mono signal.
•
Mute switch provides a single button to silence all inputs and outputs.
•
Dim switch, when engaged, will lower the level of all outputs by 20dB.
•
Main Mix Stereo Input for connecting to main mixing console.
•
Three speaker Outputs, one 1/4 inch balanced line level and two RCA unbalanced line level output.
•
Four 2-track/Stereo inputs, three 1/4 inch balanced line level and one RCA unbalanced line level input.
•
Oversized, rubber bumpers with tilting feet allow several Samson C class units to be stacked and tilted in
an ergonomically correct operating position.
•
Three year extended warranty.
0
10
0
10
0
10
3
C•control Features
SAMSON
0
10
Hide quick links:
Advertisement
Table of Contents
