Pace HD receiver Connection Manual page 11

Digital receiver
Modem/Router
Press the VOD
button on your
remote
20
Digital receiver
Digital receiver
Wireless installation guide
Please check that you have received two wireless devices, two power adaptors and
two Ethernet cables before you proceed.
ViasatHD
Pace DS830NV, Samsung DSB-H670N and Samsung SMT-S5140
Please start with completing step 1–6. In order to get started with on demand
the included USB stick needs to be installed. Follow the steps under chapter
"USB Installation for ViasatHD" on the next page.
ViasatPlusHD
(recordable)
Pace TDS850NV, Pace TDS855NV, TDS865NV and Samsung SMT-S7140
Please start with completing step 1–7.
Cut the power to your Viasat receiver by
disconnecting it from the wall socket.
Connect one of the wireless units to your
Viasat receiver with one of the Ethernet
cables.
Connect the other wireless unit to your
modem/router with the other Ethernet
cable included.
Connect the wireless units to the wall
socket.
Check the transfer rate. When the status
light in the middle on the wireless units
are on and fixed, the connection between
them is ok. If the indicator flashes the
connection is below 5 Megabits per
second. In that case, the wireless units are
probably too far apart. Try moving them
around until the indicators are fixed.
If you have a ViasatHD receiver please
continue to the section "USB Installation
for ViasatHD" in the manual. Turn on your
ViasatPlusHD receiver by connecting it to
the wall socket.
If you have a ViasatPlusHD reciever,
you can now use on demand. Start your
receiver by pressing the ON button, then
press the VOD button on your remote
control and select one of the on demand
services. If you can't see the menu please
follow the "Troubleshooting" guide on
the next page.
21