Exploded View List - Weber PERFORMER 78763 Owner's Manual

Hide thumbs Also See for PERFORMER 78763:
Table of Contents

Advertisement

6
PARTS LIST
Parts can be ordered directly from Weber-Stephen Products Company by
phone or mail.
Note - Do not return parts to Weber-Stephen Products Co. without fi rst
contacting the Customer Service Center by phone or mail. Returning the part
may not be necessary.
1.
Lid Assembly
2.
22 Inch Hinged Cooking Grate
3.
Charcoal Dividers
4.
Charcoal Grate
5.
Lid Holder Support Strap
6.
1/4-20 x 5/8 Inch Truss Head Screw
7.
Lid Holder Lower Support
8.
1/4 Inch Aluminum Washer
9.
1/4-20 Hex Keps Nut
10.
Lid Holder Wire
11.
Lid Roller
12.
Bowl
13.
H-Washer
14.
Control Rod
15.
Ash Catcher Ring Assembly
16.
Ash Catcher Handle
17.
Ash Catcher
18.
Axle
19.
Leg Frame Bracket
20.
Wheel
21.
Wheel Hub Cap
22.
Igniter Wire Stay
23.
Front Panel
24.
Igniter
25.
Tool Holders
26.
Gas Control Cover
These instructions will give you the minimum requirements for assembling your Weber
®
your Weber
gas barbecue. Improper assembly can be dangerous.
Not for use by children.
The installation must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54, Storage and
Handling of Liquefi ed Petroleum Gases, ANSI/NFPA 58; or CSA B149.1, Natural Gas and Propane Installation Code.
The pressure regulator supplied with the Weber
This Weber
®
gas barbecue is designed for use with liquid propane (LP) gas only. Do not use with natural (piped in city) gas. The valves, orifi ces, hose
and regulator are for LP gas only.
Do not use with charcoal fuel.
This appliance is not intended for commercial use.
Check that the area under the control panel and the bottom tray are free from debris that might obstruct the fl ow of combustion or ventilation air.
The areas around the LP cylinder must be free and clear from debris.
Replacement pressure regulators and hose assemblies must be those specifi ed by the outdoor cooking gas appliance manufacturer.
Place dust caps on cylinder valve outlets when cylinder is not in use.
IMPORTANT CYLINDER INFORMATION
NEVER store a spare LP Cylinder under or near this barbecue.
®
Your Weber
gas grill is equipped for a cylinder supply system designed for vapor withdrawal.
The LP-gas supply cylinder to be used must be constructed and marked in accordance with the specifi cations for LP - gas cylinders of the U.S. Depart-
ment of Transportation (D.O.T.) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes for the Transportation of Dangerous
Goods.
NorthlineExpress.com

EXPLODED VIEW LIST

GENERAL INSTRUCTIONS
®
gas barbecue must be used. This regulator is set for 10.5 inches of water column (pressure).
http://www.northlineexpress.com
27.
#8-18 x 5/8 Inch Screw
28.
Nylon Lid Handle (top)
29.
Nylon Lid Handle (bottom)
30.
Thermometer Mount Assembly
31.
Thermometer
32.
1/4-20 x 5/8 Inch Truss Head Screw
33.
Nylon Damper Handle
34.
Lid Damper
35.
1/4 Inch Aluminum Washer
36.
1/4-20 Acorn Nut
37.
H-Drive
38.
Damper Blades
39.
1/4-20 x 1 1/4 Inch Truss Head Screw
40.
1/4 Inch Nylon Washers
41.
Thermoset Table
42.
Burner Assembly
43.
Orifi ce Clip
44.
Hose and Regulator Assembly
45.
Back Panel
46.
Frame Leg
47.
CharBin
Hardware
48.
CharBin
Retention Chain
49.
CharBin
50.
Caster Inserts
51.
Casters
52.
Leg Frame Bracket Clamp
53.
Bottom Rack
54.
Matchlight Holder
WARNING:
®
Use only Weber
factory authorized parts. The use of
any part that is not factory authorized can be dangerous.
This will also void your warranty.
®
gas barbecue. Please read the instructions carefully before using
Toll-Free 1-866-667-8454

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents